FAQ: jhj guide with downloads

[skidude]

OK HERE IS A JHJ GUIDE WITH MANY OF STUFF FOR IT FILES ARE 100% CLEAN IF U NEED HELP WITH JHJ POST HERE


Complete ENGLISH GUIDE to JHJ PBot





*You no longer need D2Loader to do over 200 runs!*

You will need the following :

-Diablo II 1.10
-JHJ Pindlebot
-JHJ Pindlebot Stasher
-You may need WinZip to unzip the folders. Winzip.com

----------

After all the files are downloaded and unzipped, close ALL Diablo related programs. This includes, but is not limited to, Diablo, maphack, ect..

Now, open up your JHJStasher folder and copy/paste all files from it to your JHJPBot020 folder.

After doing that, your folder should look like this:



You are now going to double click the d2hackit.ini to open it. Once opened, scroll down until you see:



Your going to add ,mover DIRECTLY after RunPBotSor

Now it is safe to exit out of the D2Hackit.ini and MAKE SURE YOU SAVE!

From here, open up the RunPBotSor.ini to edit it. Change everything to your liking.



After that is edited, save and exit it.

Open up your mover.ini to edit it.



ReservedSpace means how many columns of charms you have. Here is what mine looks like:



Your probably safe with up to 4 columns, I'm a wuss so I wouldn't go over that.

After edited, save and exit.

Double click on the RunPCenter.exe icon. It is the icon with the people on it. This is what you will see.



Click the " Bot?? " button. You will now see:



If you are able to read, the picture above is self-explanatory. However, the character position looks like this

Just incase you don't understand:

Account Name= Your Battle.Net account name.

Password= Password you use to login to your Battle.Net account.

Leave Blank= DON'T TOUCH THIS!

Character Position: set it from 0 to 7

0 Char 1 Char
2 Char 3 Char
4 Char 5 Char
6 Char 7 Char

After you have typed all of the information needed, click the " ??D2???? " button. You will see a new window:



Within that window, go to your Diablo II directory, usually located in C:\Program Files\Diablo II\ and click the Diablo II.exe, and click Open.

The window will close and you will be back at the main JHJ screen.

Now click the ??Bot?? button. A new window will open and you will see:





That is what it should look like for a fire sorc. Fire then Meteor. For cold sorc, change the skills to your liking.

When done, click the button with the ?? on it This saves your changes. You will be back at the main JHJ screen again.

Click the save button.



After clicked, you will notice the number you typed that was supposed to be 1-9 will now be there in bold where I typed " Save Button "

When you see the bold number, exit out of the Control Center. Yes, you MUST exit right out of it by clicking the X in the top right hand corner.

Once closed, double click the people again and it will open. You will now see::



Click the number that is on the left (The number you specified that is 1-9) so that it is highlighted, and click the Greater Than button. ( > )

Diablo will startup and go to the login screen and nothing will happen. Now you will minimize Diablo II, and click your JHJPBot020 folder and double click the loader.exe. You will see an hour glass, and it will go away after a couple seconds. Now click your Diablo again (should be minimized) and it will now be on the character select screen.

*To run more than 200 runs. after the bot has started simply click the X on the RunPCenter window that is currently up. This will NOT stop your bot, and it is the easiest way to do over 200 runs.

Your done!

How To Multibot ?

first off you need to make a folder called Plugin2

then you need to make another copy of JHJPbot UNZIPPED.

bring it to another area on your computer so that the 2 are not by each other and you know which is which.

At this point extract and config.

Now where it says all the stuff link -skiptobnet -w -ns and all that add this after it

-mpq cdkey.mpq -pdir Plugin2

this will make it use your second cd key and make it load the second bot out of the Plugin2 folder instead of just the Plugin folder.

now copy and paste the bot into your Plugin2 folder and run

Now you can enjoy having 2 bots run at once...
you can use more bots if you want just make new plugins like plugin33 and -mpq cdkey.mpq -pdir Plugin33, ofc you must have more cd-keys :]




FAQ on JHJ - most recent problems with solution

i get ip-ban every xx runs... help?
this is prolly cuz you bot creates games too fast, afaik it has nothing to do with the game creation delay thingy. it's just like that. your sorc chickens out to often, cuz you told her to do so, if pindle is fi/ci. so she enters portal, and chickens out immediatly.
she does it a few time and you'll get banned...
so remove all chickens!! get a good tank merc and you won't have any problems.
after removing make sure that your .ini looks like that:
[Avoid]
count=0

i get c/i a soon as i enter the game... what the...???
you prolly configured wrong skills, don't configure any skills you don't have, make sure you select fireball or glacial for the left button and meteor/blizz for the right button!
have a look at energy shield, if you don't have it, don't use it...

my bot gets stuck at malah, just sits there for a couple of seconds and exits right away, over and over again. what can i do?
here's the deal: you haven't configured your HPGuard, MPGuard right. it should look like like this:
HPGuard1=250 (is the healthpointnumber you want to drink a pot)
HPGuard2=0 (is the healtpointnumber you want to leave the game, if you have a good merc you won't need it at all)
MPGuard=0 (Manapointnumber you want to leave game i guess, maybe drink pot, just set it to 0)
MercHPGuard=10 (this is in %, not an integer#!!!! Percentage of your mercs life you want to chicken at)

my bot exits game right before entering the red portal! what's wrong??
your bot probably tries to cast energy shield, which you don't have! open the RunPBotSorc.ini and set EShield=0.
and no, there's no way to cast any cold armors! (not yet at least)

my bot enters portal and leaves right when i see pindles skills. WTF?
now that is because you have configured your bot to chicken out the game, whenever pindle is immune to something or has a certain aura. Try this:
open RunPCenter.exe
click Bot??
click ??Bot??
you see on top something like "??????Boss", right?
under that you see two buttons with '+' and '-'. select every entry in the list below and delete them with '-'
that should fix it.
to make sure open your RunPBotSor.INI and look for [Avoid]. If all chickens are disabled it should look like this:
[Avoid]
count=0

After i pwnd pindle my sorc just sits there and won't pickup shit, won't leave the game nether. Y????
that's cuz you use zoids pickit!
disable zoids, JHJ's got an own pickit inplemented, if you try to use both together, both pickers try to pick up things, one is faster, the other one just tries to pick up something you already have, and waits forever!
remove any zoid files from your plugin-folder in your d2-folder!!

my pickup-logfile is filled with crap, how can i make it show only the things i picked up??
easy one though:
open your RunPBotSor.INI and set Log=2. Thats it

My bot won't attack, just sits there doing nothing! WTF?
she does attack, it's just that you don't see the animations.
also make sure you have blizzard/metoer as you RSkill in RunPBotSorc.INI. should look like this:
Blizz/Glacial-sorc:
LSkill=55
RSkill=59
Meteor/Fireball-sorc:
LSkill=47
RSkill=56

i get ip-ban every xx runs!! help?
if your bot chickens to often cuz of your HPGuard or you configured it for cold/fireimmune pindle, it'll create games too fast. that'll get you banned for some minutes/hours. (at least i guess it's like that)

my bot only does 200 runs and stops? (maybe opens xx windows of d2) WTF??
ok, the most discussed issue in this thread i guess, do it like this, step by step: (or have a look at 1st page (by allaboutdupe) or blee's page)
- you configured everything, the bot runs fine the 200 runs
- make sure you have d2loader by onlyer installed
- create a folder called 'jhj' in your d2-folder
- put ALL files from the JHJ-bot in there
- open RunPCenter.exe
- press the 'Bot??'-button
- new part pops up, you see a textfield saying something like:
Code:
-w -Skiptobnet -ns -res800

- make that look like this (by adding -pdir "jhj"):
Code:
-w -Skiptobnet -ns -res800 -pdir "jhj"
now it should restart d2 after 200 runs and continue

stasher always puts away my mf charms!! damn, any helP?
yup, put all your charms to the right of your inventory!
let's say it looks like this:
_ _ _ _ _ _ _ _ _ _ _
|_|_|_|_|_|_|_|_|x|x|
|_|_|_|_|_|_|_|_|x|x|
|_|_|_|_|_|_|_|_|x|x|
|_|_|_|_|_|_|_|_|x|x|

that means your have 2 colums full with charms for mf or res or whatever. open the mover.ini and set ReservedSpace=2.
ClearCount=50 means, your bot will stash every 50 runs!! it also stashes to cube, if it's in your stash!!

Error "no room for unit"-thingy
make sure your sorc is in act 5!!

Hope that'll make it easier for all of us!

[jedimaster86]

very nice guide, ski; good job setting this up. this will help greatly for those that need it (nice jhj for dummies pic too hehe).

[eB.ViRuZ]

Hey could u maybe give me the site u got this on?...ive seen this b4 but its on a destroyed floppy disk =\....lol

[eB.ViRuZ]

lol nvm i found the stuff...on the bottom...just too lazy to read lol

[flaw_less1]

do u think it works whit 1,11?