D2NT31 NTBot42 Tutorial

[Asta]

How can i create or find a program to allow following/ co-op runs with multy accounts?

[comper]

hey man... (comper) i know you dont know me... I have been playing Diablo since The first one came out... But i am very new to botting, and i thnk i fill out the script correctly and everything and filled out everything correctly when it ask for acct info and all that. But when i saved my profile and highlighted to run it.. all it does is just LOAD...


well now i am getting an error code. UNHABDKED EXCEPTION:
ACESS_VIOLATION(c0000005)

not sure which ver of the bot you downloaded but if it was from me and if you have win 7 then you will need to run the manager in winxp and/or admin mood and if it was one not from me then sounds like you need the updated .dll file from here - D2NT 1.13D Patch - Downloads - Blizzard Sector - Diablo 3, Starcraft II, WoW, Diablo 2, Trading, Downloads, Editors, Items, Forums
BUT if the bot was from me they have been patched and do the win xp mode and/or admin mode - let me know if that worked or need any other help
thanks


[COLOR="Silver"]

---------- Post added at 08:05 AM ---------- Previous post was at 07:51 AM ----------

[/COLOR]

How can i create or find a program to allow following/ co-op runs with multy accounts?

have you looked into this bot - Etal V7 - Green Goblin - 1046.P - Downloads - Blizzard Sector - Diablo 3, Starcraft II, WoW, Diablo 2, Trading, Downloads, Editors, Items, Forums
also you can go here first and read more about what the bot has - Main Page - Project Etal Wiki
if you have any other ?'s please ask or need help setting it up - on help setting it up is a lot easier doing it thru teamviewer - you don't have to just that I can show you the setting and what does what
thanks

[Hwo4rang]

Reference Error:nt_loadconfig is not defined

im having this problem and i don't know why... i've goy the correct name at NT_Config_Paladin_charactername

[comper]

Reference Error:nt_loadconfig is not defined

im having this problem and i don't know why... i've goy the correct name at NT_Config_Paladin_charactername

if you have the file named right then you have a error in the file - if you like you can c/p your char config file in pastebin.com and I can help you find it
thanks

[ToStoned]

Hey comper... ok i have done Several things...

Ran a scandisk
I have deleted and reinstalled D
I downloaded that Patch.

I use this version: http://i1240.photobucket.com/albums/gg48...roblem.jpg

and i was wondering, were i put my cd key... i do just put those file names? D2Char.mpq;d2sfx.mpq (something like that) or do i put my actuall cd key?


Thank you,
stoned[COLOR="Silver"]

---------- Post added at 11:38 AM ---------- Previous post was at 11:34 AM ----------

[/COLOR]

Hey comper... ok i have done Several things...

Ran a scandisk
I have deleted and reinstalled D
I downloaded that Patch.

I use this version: http://i1240.photobucket.com/albums/gg48...roblem.jpg

and i was wondering, were i put my cd key... i do just put those file names? D2Char.mpq;d2sfx.mpq (something like that) or do i put my actuall cd key?


Thank you,
stoned

http://i1240.photobucket.com/albums/gg48...orrect.jpg

[comper]

Hey comper... ok i have done Several things...

Ran a scandisk
I have deleted and reinstalled D
I downloaded that Patch.

I use this version: http://i1240.photobucket.com/albums/gg48...roblem.jpg

and i was wondering, were i put my cd key... i do just put those file names? D2Char.mpq;d2sfx.mpq (something like that) or do i put my actuall cd key?


Thank you,
stoned

---------- Post added at 11:38 AM ---------- Previous post was at 11:34 AM ----------



http://i1240.photobucket.com/albums/gg48...orrect.jpg

remove what you have in the cdkey line and the 1 from the #game/cdkey box and then click ok and when it takes you back to the other bow highlight your profile and then click save - any time you change anything in the manager you have to resave it - do that and let me know what happens - you don't need your cd key - that line is when you have more then 1 set of d2 keys and your other sets are made with a .mpq file and thats where you would add it.

[Asta]

I have another quest, in the Etal bot where is the line to rez my merc if killed?

[comper]

I have another quest, in the Etal bot where is the line to rez my merc if killed?

down in this group - General configuration there is a line - NTConfig_UseMerc = false; Set true if you will use a mercenary, will revive merc at a reviver npc.
thanks

[Asta]

Thank you very much!!

[comper]

Thank you very much!!

you are welcome and let me know if you need any other help
thanks

[Njoda91]

So i got a problem, i press Run but it wont start? its just keep going to reset and reset? i run Windows Xp. and use to run d2nt without any probs any help?

[comper]

So i got a problem, i press Run but it wont start? its just keep going to reset and reset? i run Windows Xp. and use to run d2nt without any probs any help?

I sent you a pm so you are running win xp I would say you downloaded one not patch for 1.13d so you can down try downloading
1. plain jane d2nt - D2NT 3.1 NTBot 4.2 v1.13d - Downloads - Blizzard Sector - Diablo 3, Starcraft II, WoW, Diablo 2, Trading, Downloads, Editors, Items, Forums
2. etal bot modded - Etal V7 - Green Goblin - 1046.P - Downloads - Blizzard Sector - Diablo 3, Starcraft II, WoW, Diablo 2, Trading, Downloads, Editors, Items, Forums
I can help you with both if you need some help
thanks

[Asta]

Another question, How do i add a CDkey to allow etal to run 2 account from the same comp. Then how can make them run together once part 1 is done.

[comper]

Another question, How do i add a CDkey to allow etal to run 2 account from the same comp. Then how can make them run together once part 1 is done.

do you already have the 2nd d2 install or not? if not - options
1. use the bot to run both keys by making the 2nd set of keys in a .mpq file
2. if you don't want to use the bot all the time then you can use sandboxie but you will have to have another d2 folder
to run together you set one as leader and the others as leechers but it is set up to just run a few scripts together like trav, choas and baal
you can let me knows what you have already that way I can tell you what you need to do
thanks

[Asta]

Where do i post the .mpq file for the 2nd key set?

[comper]

Where do i post the .mpq file for the 2nd key set?

if your 2nd d2 is already a mpq file that you made then when you make the profile for your 2nd char you put your main d2 in the path line just like you did on the first one but then you take the name of the .mpq file ( what you named it ) and put it in the CDKey box - say I have a mpq file that I made and named it comper.mpq then you would but comper.mpq in that CDKey line has to have the .mpq
then that char will run thru your main d2 but will use that new mpq file that has your 2nd key set in
remember you have to make a new .mpq file with your 2nd set of keys

[vampirus2k]

my bot loads but stops at the single player b.net screen, whats wrong?

[comper]

my bot loads but stops at the single player b.net screen, whats wrong?

look in your pm for the answer and try that and if you still having problems if you have teamviewer where I can log on and see what is going on
thanks

[Asta]

How do i set my leader bot to invite my leechers and how do i get him to make a TP for them and tell them the key phrase to enter?

[comper]

How do i set my leader bot to invite my leechers and how do i get him to make a TP for them and tell them the key phrase to enter?

leader and leechers need to be on both others friends list

leaders char config file
the leaders char config file set this to true - NTConfig_PublicMode = false;
down in act 4 for Diablo here are his msgs and they can be changed but they have to be exact same think when you add them to your leehers file
NTConfig_CSTpNotSafe = "TP up. Might be hot!";
NTConfig_CSTpSafe = "TP safe.";
for baal -
Baal_HotTp = "TP up.";
Baal_SafeTp = "TP safe."; but they need to be diff from diablo and baal msg's if you are running both


the leechers char config file theses 2 lines need to be filled out -
NTConfig_Leader = "config me"; <- Leaders name spelled exact
NTConfig_PartyOnlyLeader = false; <- true and then this - NTConfig_PublicMode = false;

then in NTLeechStarter file you need to set theses -
var leaderAccountName = "yyy";
var leaderName = "xxx";
and this if the game has a password
var gamepassword = "zzz";

then in the manager the leechers will have the NTLeechStarter in the entry point
thanks